Harvard Power Systems

Harvard electronic HID ballasts offer new ways of managing power and improving street lighting efficiency.

CoolPower CPE
Standalone electronic Ballast for HID lamps

The CoolPower CPE is the latest electronic ballast in our extensive range for HID outdoor lamps. Compatability – Increased to ensure usability within a wide industry footprint. High Efficiency – High power factor (>95) and increased efficiency. Long Life – The aluminium case provides a robust enclosure protecting the electronics and ensures excellent thermal management extending product life. Quick Assembly – Screw-less spring clamp ensure easy and rapid set up. Outdoor Protection – Conformal coating ensures the ballast is protected against outdoor conditions.

CoolPower RapidPlug
CMS Dimming ballast for HID lamps

A high efficiency electronic ballast incorporating rapid assembly plug and socket connections to aid installation on site. Simple and rapid connection to mains and luminaire. Low ignition voltage.

SmartNight HID
CMS Capable stand alone dimming ballasts for HID lamps

45/50/60/70/90/100/140/150W The SmartNight ballast is a stand alone HID ballast designed for street and road lighting applications which only have one switched supply available to the lantern, switching to centralised around midnight. The ballast will switch on at full power and dim to 75% or 50% light output at a pre-determind time. Smartnight ballasts are WiMAC compatible so it’s easy to install LeafNut, at any time, and make further carbon reductions and energy savings.

SwitchedDim HPIDD
CMS dimming ballasts for HID lamps

The SwitchedDim range of ballasts are a stand alone HID ballast designed for street, road lighting and indoor applications. It is used in conjunction with an external switching device such as a time clock switch, motion sensor or switched wire. Switched Supply Operation – The ballast switches on at full power and dims to a predetermined level when the switched supply is absent. The ballast will then quickly return to full 100% output when switched supply is present. Reduced Energy Consumption – A standard SwitchedDim ballast saves 30% of power when dimmed. Presence Detection – The lamp will quickly return to 100% when motion is detected.

LeafNut Enabled Electronic ballast
CMS dimming ballasts for HID lamps

The HPIDD range of ballast for outdoor use are extensively used in street lighting applications. Compatible with LeafNut CMS as standard.

High Power Ballast HPIDD
Stand alone for HID lamps

The HPIDD range of HID ballasts for outdoor use are extensively used in street lighting applications. Long Life – The aluminium case provides a robust enclosure protecting the electronics and ensures excellent thermal management extending product life. High Efficiency – HPIDD ballasts can reduce carbon emissions and deliver considerable energy savings compared to standard conventional gear. 4kV surge suppression protects against transients and voltage spikes and the ballast can be operated up to 25m away from the lamp. The ‘Remote’ version comes with a screw-less cable speeding up assembly time.

Dali Cosmopolis Ballast HPIDD
Stand alone fully DALI compatible ballast to power Cosmopolis lamps

DALI dimmable HID ballasts offer a high power intelligent dimming solution for outdoor lighting. Long Life – The aluminum case provides a robust enclosure protecting the electronics and ensures excellent thermal management extending product life. Dimming Capabilities – DALI dimming support from 100% to 60% output power and the ability to turn completely off. Individual and Group Control – Ability to control individual luminaries and simultaneous control of all or specified groups. 4KV surge suppression protects against transients and voltage spikes.

DALI SON Ballast – HPIDD
Stand alone fully DALI compatible ballast to power SON lamps

DALI dimmable HID ballasts offer a high power intelligent dimming solution for outdoor lighting. Long Life – The aluminum case provides a robust enclosure protecting the electronics and ensures excellent thermal management extending product life. Dimming Capabilities – DALI dimming support from 100% to 60% output power and the ability to turn completely off. Individual and Group Control – Ability to control individual luminaries and simultaneous control of all or specified groups. 4KV surge suppression protects against transients and voltage spikes and the ballast can be operated up to 25m away from the lamp.

Harvard Indoor HID ballasts are used in the most prestigious retail sites, department stores and car showrooms.

CoolPower CPE – Stand alone Electronic ballast for HID lamps

The CPE range of HID ballasts for indoor use are extensively used in retail display applications and other commercial environments. Our most advanced indoor ballast benefits from a sleek and compact design. Compatible Increased compatibility to ensure usability within a wide industry footprint. Efficient High power factor (>95) and increased efficiency. Long Life The aluminium case provides a robust enclosure protecting the electronics and ensures excellent thermal management extending product life. Quick Assembly Screw-less spring clamp ensure easy and rapid set up.

CoolPower – Rapid Plug

A high efficiency electronic ballast incorporating rapid assembly plug and socket connections to aid installation on site.

• Simple and rapid connection to mains and luminaire
• Compact and lightweight
• Versions available with remote operation up to 25m
• Microprocessor controlled
• ENEC approved
• Low ignition voltage

CoolPower – Micro 20/35Rapid Start

• Remote Mounting
• Operates CMH, CDM, CDM-Tm, HCI & Britespot
• Max lamp-ballast distance 15m
• Ignition voltage <2.5kV
• Microprocessor controlled
• Class II insulation
• ENEC approved (pending)
• Thermal protection
• 88% efficient
• Screw-less cable clamp assembly
• Fits through 58mm cut out

High Power Ballast – HPIDD

The HPIDD range of HID ballasts for indoor use are extensively used in retail lighting applications. The aluminium case provides a robust enclosure protecting the electronics and ensures excellent thermal management extending product life. 4kV surge suppression protects against transients and voltage spikes and the ballast can be operated up to 25m away from the lamp. The ‘Remote’ version comes with a screw-less cable speeding up assembly time.

Nano Digital Drive – NIDD

• Miniature ballast, ideally suited for track spot lights
• Compatible with CMH and HCI lamps
• Compact and lightweight
• Ignition voltage <2.5kV
• Lamp-ballast distance can be up to 5m
• Microprocessor controlled
• ENEC approved (pending)
• Input/Output = 0.75mm2 to2.5mm2 cable terminal block

CL LOW Power
High efficiency. High pF upto 10w

Up to 10w 250mA, 350mA, 500mA & 700mA CoolLED drivers provide a high performance solution for powering high-brightness LEDs from a mains supply. The power factor corrected, class II driver has fully isolated, SELV output delivering up to 10W of power. All CoolLED Drivers have a high efficiency design, which ensures cool operation and long life. The compact enclosure is available in Integral (B) and Remote Mount (C) versions. Remote types feature screwless cable clamps. These drivers have been optimised to deliver good efficiency and power factor for loads 10W and below CoolLED Drivers are open and short-circuit protected and have self resetting over temperature trip.

CL DALI Low Voltage
High efficiency intelligent digital dimming

Up to 21w 350mA, 500mA, 700mA, 900mA & 1050mA CoolLED drivers provide a high performance solution for powering LEDs from a mains supply. The DALI controlled driver provides a digital alternative to standard 1-10V dimmable drivers and offers these key benefits: Full Dimming Capabilities Full DALI dimming support from 100% to 1% output current and the ability to turn completely off. Individual and Group Control Ability to control individual LED luminaires and simultaneous control of all or specified groups. High Efficiency and Long Life High Efficiency design ensures cool operation and long life. There is an extra benefit of a very low off power. Compact Enclosure and Fast Assembly Available in Integral (B) and Remote Mount (C) versions. remote types feature screw less cable clamps.

CL Analogue Low Voltage
1-10v isolated control, dimmable LED driver

Up to 22w 350mA, 500mA, 700mA & 1050mA CoolLED drivers provide a high performance solution for LEDs from a mains supply. Analogue Dimming Control Linear dimming from conventional 1-10V dimmer. Can also be programmed with a fixed or variable resistor, refer to graph below to calculate required resistor for desired current. Reinforced isolation between 1-10V & LEDs. Regulated Output Current LED series string is supplied with electronically regulated constant current. High Efficiency and Long Life High efficiency design ensures cool operation and long life. Active Power Factor Correction Reduces mains current and lowers electricity cost. Self-Protected Open and short-circuit protected, self-resetting over temperature trip Compact Enclosure and Fast Assembly Versions available: Integral ‘B’ type, Remote Mount ‘C’ type. ‘C’ type features screw less cable clamps.

CLK10 Low Power
Compact footprint. High efficiency, high pF up to 10w

Up to 10w 350mA, 500mA, 700mA & 1050mA CoolLED drivers provide a high performance solution for powering high-brightness LEDs from a mains supply. The power factor corrected, class II driver has a fully isolated, SELV output delivering up to 10W of power. The Driver employs new advanced circuitry, leading to a cost effective and efficient solution for low power installations. All CoolLED Drivers have a high efficiency design, which ensures cool operation and long life. The high efficiency allows operation in 60°C ambient. The compact enclosure is available in Integral (B) and Remote Mount (C) versions. Remote types feature screw less cable clamps. CoolLED Drivers are open and short-circuit protected and have self-resetting over temperature trip.

CLK15 Low Power
Compact footprint. High efficiency, high pF up to 15w

Up to 15w 350mA, 500mA and 700mA CoolLED drivers provide a high performance solution for powering high-brightness LEDs from a mains supply. The power factor corrected, class II driver has a fully isolated, SELV output delivering up to 15W of power. The Driver employs new advanced circuitry, leading to a cost effective and efficient solution for low power installations. All CoolLED Drivers have a high efficiency design, which ensures cool operation and long life. The high efficiency allows operation in 50°C ambient. The compact enclosure is available in Integral (B) and Remote Mount (C) versions. Remote types feature screw less cable clamps. CoolLED Drivers are open and short-circuit protected and have self-resetting over temperature trip. Consult the sales office for Conformal Coated, Potted, Hot-Plug and custom versions.

CLK20 Phase
Compact footprint. Smooth leading and trailing edge mains

Up to 20w 260mA, 350mA, 500mA, 700mA, 1050mA & 1400mA CoolLED drivers provide a high performance solution for powering LEDs from a mains supply. The power factor corrected, class II driver has a fully isolated, SELV output delivering up to 20W of power. The driver employs new advanced technology providing support for both Leading Edge & Trailing Edge Phase Cut dimmers, with a high efficiency & low LED ripple current. The high efficiency allows operation in 50°C ambient. The compact enclosure is available in Integral (B) version. CoolLED Drivers are open and short-circuit protected and have self-resetting over temperature trip

CL Standard
Non switchable constant current

Up to 33w 270mA, 350mA, 400mA, 500mA, 600mA, 700mA, 1000mA & 1050mA CoolLED drivers provide a high performance solution for powering high-brightness LEDs from a mains supply. The power factor corrected, class II driver has fully isolated, SELV output delivering up to 33W of power. All CoolLED Drivers have a high efficiency design, which ensures cool operation and long life. The compact enclosure is available in Remote with Flying Leads (A), Integral (B) and Remote (C) versions. Remote types feature screw less cable clamps. CoolLED Drivers are open and short-circuit protected and have a self-resetting over temperature trip. Consult the sales office for versions where the current level can be set by external switch or presence detector. These drivers include a “soft dim” feature to avoid sudden steps in LED brightness.

CL Switchable
Switchable constant current

Up to 33w 350/500mA, 350/700mA, 450/900mA, 500/1000mA & 1200/1400mA CoolLED drivers provide a high performance solution for powering high-brightness LEDs from a mains supply. CoolLED Switchable Drivers feature a switch, accessible during installation, to select between two current values. The power factor corrected, class II driver has fully isolated, SELV output delivering up to 33W of power. All CoolLED Drivers have a high efficiency design, which ensures cool operation and long life. The compact enclosure is available in Integral (B) and Remote Mount (C) versions. Remote types feature screw less cable clamps. CoolLED Drivers are open and short-circuit protected and have self-resetting over temperature trip. These drivers include a “soft dim” feature to avoid sudden steps in LED brightness.

CL Standard Hybrid
Non switchable constant current

Up to 33w 270mA, 350mA, 400mA, 500mA, 600mA, 700mA, 1000mA & 1050mA CoolLED drivers provide a high performance solution for powering high-brightness LEDs from a mains supply. The power factor corrected, class II driver has fully isolated, SELV output delivering up to 33W of power. All CoolLED Drivers have a high efficiency design, which ensures cool operation and long life. The compact enclosure is available in Remote with Flying Leads (A), Integral (B) and Remote (C) versions. Remote types feature screw less cable clamps. CoolLED Drivers are open and short-circuit protected and have a self-resetting over temperature trip. Consult the sales office for versions where the current level can be set by external switch or presence detector. These drivers include a “soft dim” feature to avoid sudden steps in LED brightness.

DUAL DIM CLR50
50w of power with DALI/1-10V dimming and 5v or 12v auxiliary fan

Up to 50w 700mA, 1000mA, 1050mA, 1200mA & 1400mA CoolLED drivers provide a high performance solution for powering high-brightness LEDs from a mains supply. Dimming to 5% of maximum output current Harvard’s most advanced LED driver gives end users industry leading efficient control of their LED lighting systems. The first CoolLED driver in ‘Dual Dim’ product portfolio to be released with Analogue and DALI Dimming. The power factor corrected, class II driver has fully-isolated, SELV output delivering up to 50W of power Optional fan Output – Factory set auxilary 5V or 12V 2W output. Non-fan and non-dim options are available

CL40 Analogue 1-10v
Up to 40w of power with 1-10v dimming and 5v or 12v auxiliary fan output

Up to 40w with Fan Output 700mA, 1050mA & 1400mA CoolLED drivers provide a high performance solution for powering high-brightness LEDs from a mains supply The power factor corrected, class II driver (B/C style) and class I driver (OF style) has fully isolated, SELV output delivering up to 40W of power Analogue Dimming Control Linear dimming from conventional 1-10V dimmer. Can also be programmed with a fixed or variable resistor. Ability to dim to 5% of maximum output current Fan Output – Optional auxiliary 5V/12V 1W output suitable for powering fans e.g. Nuventix Synjet. Fan output is turned off when dimmed below 25% of maximum output to save energy. Hot Plug – Also benefits from output Hot Plug protection To maintain SELV isolation of the driver output, the 1-10V dimming control should have reinforced or double insulation from the mains supply.

Further CoolLED drivers available from Harvard include the following rages not show here, please contact the Bernlite sales office for further information.

Products include: CLS40 DALI, CL40 DALI, DUAL DIM CL50, CLQ SINGLE, CLQ TWIN, CLP TWIN DALI, CLP TWIN ANALOGUE 1-10v, CLP TWIN SMARTNIGHT, CLP88C LEAFNUT, CLS80, CLS90, CLH150, CLH200.

EMERGENCY LED drivers
CoolLED constant current drivers provide a high performance solution for powering high-brightness LEDs from a mains supply

(Maintained and Non-Maintained) The ELD family of emergency, Maintained and Non-Maintained LED drivers from Harvard Engineering offer a simple, cost effective solution for locations requiring reliable, low power lighting in the event of a mains failure. A single compact unit incorporates intelligent control of both battery charging and constant current drive to the LED. A separate output is available to power a small indicator LED giving the status of battery charge. High efficiency operation permits use of a small, 2/3-cell battery while still providing 3 hours emergency operation. Additionally, the -M version of the product features a switched-live input to enable use of the LED for general illumination in addition to emergency operation.

Emergency LED Modules
Harvard’s LED modules for emergency bulkhead lighting applications

Two Types of modules are available. Panel mount version Ceiling mount version featuring spring loaded fixing allowing for fast installation. Both types come with flying leads ready for wiring into our range of Emergency drivers, which feature push fit connecters, a tool free solution. Supporting a drive current of up to 500mA Panel mount module will emit approximately 115 lumens. While the Ceiling mount module will emit approximately 100 lumens.

Products available: LED31, LED36, LED30, LED35

DKE Ballast

Harvard’s DK range of fluorescent ballasts are manufactured, designed and developed in the UK. Key Product Benefits Compact – The compact design fits on a standard choke footprint. Power Factor Correction – The power factor corrected ballast complies with all current specifications for EMC and harmonics. Long Life – Precise preheat control for improved lamp life and enhanced thermal characteristics for cooler running. Plus Failed lamp safety shut down eliminates end of life flicker.

The CL DALI Low voltage LED driver: